<tbody id="k59wd"><legend id="k59wd"></legend></tbody>
    <menuitem id="k59wd"></menuitem>

  1. <small id="k59wd"><listing id="k59wd"></listing></small>

    <mark id="k59wd"><var id="k59wd"></var></mark>

    1. <tbody id="k59wd"><table id="k59wd"><thead id="k59wd"></thead></table></tbody>
    2. <th id="k59wd"></th>
      <code id="k59wd"><delect id="k59wd"></delect></code>
      <th id="k59wd"></th>
      當前位置:網站首頁>沙金設備產品展示 > 水上砂金設備 >下挖3-5米滾筒篩式淘金船設備清單

      下挖3-5米滾筒篩式淘金船設備清單

      淘金船選金方案

      流程簡介:

      原料通過挖斗進入四絞刀絞洗筒進行絞洗脫泥,然后進入滾筒篩內進行篩選分級為:<6mm細料、6-30mm粗料、30mm以上廢料三個級別,其中30mm以上廢料直接通過廢料溜槽排出至廢料區域;

      6-30mm粗料進入一臺振動溜槽進行回收后,廢料排出至廢料區域;

      <6mm細料排入盛料箱中,通過沙泵進入一臺臥式全自動連續排礦離心機內進行精選,精料排入精料筒內,廢料由廢料管排出。

      Technological process

      The material from the bucket shipped into the trommel screen fixed with 4 reamers which can ream and wash the clay off,then to be separating into 3sizes <6mm,6-30mm>30mm,the biggest size useless are directly discharged to waste area by scrap sluice;

      6-30mm material into shaking chute for recycling, scrap material discharged into the waste area;

      The small size material <6mm gettinginto the material box through sand pump feeding into a horizontal auto&no break discharging centrifuge, then the concentrate got and finally into fine material box, scrap material to be get rid from waste pipe.

      技術參數

            名稱
      Prouduction Name

      規格
      Specifications

      數量
      Quantity

      功率 Power/KW

      備注
      Remark

      浮體
      Pontoon

      單寬1.8米,高0.92米,長25米
      Single width 1.8m,height 0.92m,Length 25m

      1套

      挖斗式洗沙機

      Bucket type sand washing machine

      主支架高5.6米:16#槽鋼對扣
      Main frame height:5.6m Double 16#Usteel
      水下大臂長16.5米:12#/10#槽鋼
      Arms under water:16.5m 12#/10#U steel
      80#挖斗:共60個
      80#Bucket:total 60 pieces
      鏈條:高錳鋼焊接
      Chain:High manganese steel welding
      減速機:750#
      Reducer:750#

      1套

      37

      滾筒篩
      Trommel screen separator

      絞洗筒長2.2米,四條絞刀
      The trommel fixed with 4 Reamers: length 2.2m
      凈篩孔長度3米,內徑1.3米,外徑:1.6米
      Mesh length:3m,inner diameter:1.3m outside diameter:1.6m
      支架:15#方管
      Frame:15#square pipe

      1套

      7.5

      臥式離心機
      Horizontal centrifuge

      1200#連續排礦全自動離心機
      1200#Auto discharging with no break centrifuge

      1套

      21.5

      PLC電腦控制
      Controlled by PLC

      振動溜槽
      Shaking sluice

      1350*4500mm

      1套

      3

      大臂卷揚機
      Arms winding engine

      400#減速機

      1臺

      11

      主錨
      Main Anchor

      350#減速機

      1臺

      3

      錨繩卷揚機
      Winding engine of Anchor line

      3KW

      4臺

      12

      水泵
      Water pump

      7.5KW

      1臺

      7.5

      離心泵
      Centrifugal pump

      7.5KW

      1臺

      7.5

      沙泵
      Sand pump

      4inch

      1臺

      11

      配電柜
      Electricity cabint

      含至設備電機線
      Including the electricity wire to machine

      1套

      -

      發電機組
      Generation unit

      150KW

      1套

      -

      總用量功率
      Power

      同時用電量121KW,工作中用電量:95KW(不含照明及其它建議用150KW發電機組)
      Power121KW needed running all machines sametime,the working period 95KW needed

      (not including lights,we advise to  use150KW generation unit)


      產品分類

      /PRODUCTS

      聯系我們

      /CONTACT

      全國統一咨詢熱線

      0536-3593111

      地址:青州市黃樓街道辦事處西建德村

      電話:0536-3593111

      傳真:0536-3593111

      手機:15053659999,15653473333

      Email:1592999333@qq.com

      版權所有:青州冠誠重工機械有限公司 魯ICP備09020970號-47